Autogate
Swing Gate System
Automatic Swing Gate Operator.
SW200P MAG swing
Standard Basic function. Fully oil bath motor for better lubricant and more silent operation. Advanced 8-spring anti-crush technology (8SAC) for smoother operation, longer life time and higher safety.
Effectively enhance Safety and Convenient while creating prestigious entrance to your home.
SW200P has been carefully designed and fully tested for tough wheather condition, heavy rain, lightning strikes, high temperature and humidity. Its performance is continuiously refeined by 20 years of experience and proven by successful installation worldwide.
Simple operation fro remote control or push button. One button to fully open two gate leaves and another button to open only one leaf. Press button to stop leaf at any angle and press again to resume movement. Manual key to open during power failure.
Standard features:
- Advanced 8-SAC (8-Springs-Anti-Crush) slip clutch mechanism automatically suspend gate's movement if it encounter any obstacle such as vehicle, human and animal in its traveling path while maintaining powerful movement. This is very important to protect the safety of user and avoid the motor to overload itself(longer life for motor)
- Anti-Shake. Balanced force from the 8-SAC springs allow smooth movement that prevent the gate from shaking or bouncing at the end of the opening or closing.
- Oil bath motor. Gear box is fully submerged in oil bath to ensure most quiet operation while prolonging mechanical life time.
- Good Quality. High graded component on controller ensure better protection against electric surge and more consistent performance for years to come. Mechanical parts are made from durable and rust resistance material.
- Dual speed cushioning. Gate will slow down towards the end of opening or closing swing to avoid bang loudly into stopper or side wall at high speed.
- Pillar light control.
Sliding gate system
These are complete sets of sliding gate operator system that includes a motor, gear rack, control panel and remote control.
 Description:
MAG SL100ACP is a AC sliding gate operator system package is specifically design to handle residential capacity with ease. SL100ACP is NOT a new autogate system the just emerged recently. It has been installed all over Malaysia with proven satisfied customer for more than 10 years. You can definitely count on MAG for a trouble free and reliable autogate system for years to come.
SL100ACP MAG AC sliding
600 - 1000 kg max gate weight for standard residential. Greased motor. Smooth and silent operation. AC motor for lower cost system
Special feature:
- Anti Jam technology
Most of AC motor have this common problem that motor gear set will jammed up when hit obstacle or hit pillar wall during gate overshoot. Upon motor jam, there is no way user can move the gate. Manual release of clutch is also not possible since the gear is jammed. Frustrated user will have to call technician for servicing. SL100AC special anti-jam design prevent this from happening.
- Soft start built into motor
Most AC motor will have a loud machine sound as the gear kicks into motion from cold start. SL100AC motor auto compensate the starting force so that it does not produce any sound.
- Extra quiet with Nylon pinion gear
MAG nylon pinion is made with special polymer formula. Nylon elastic property produce minima friction noise with metal gear rack while maintaining sufficient hardness to support up to 600 kg gate with ease.
Standard feature:
- Standard gate weight supported is 600 kg
- Silent operation < 60dB
- Opening speed 10 meter / min
- Gearbox is greased type
- Coded remote control allow 30 to 50 meter transmission
- Support photo beam input for extra safety feature
- Limit switch using heavy duty micro switch for reliable and accurate positioning.
- Superior built quality with high grade material
MAG Wing_203 arm gate system
Description:
MAG Wing 203 is an electro mechanical complete system for automatic arm gate system. it composed with primary of an electronic panel unit that control actuator motor to open or close the gate in swing motion.
 Standard feature:
- Max gate weight per leaf is 200 kg
- Full DC operation to avoid any potential electric hazard
- Backup battery standby for power failure
- Actuator capability for 90° opening within only 8 to 10 second
- No underground installation
- Coded remote control allow 30 to 50 meter transmission
Mag Wing303
Description:
MAG Wing 303 is an electro mechanical complete system for automatic arm gate system. it composed with primary of an electronic panel unit that control actuator motor to open or close the gate in swing motion.
Standard feature:
- Max gate weight per leaf is 400 kg
- Full DC operation to avoid any potential electric hazard
- Backup battery standby for power failure
- Actuator capability for 90° opening within only 8 to 10 second
- No underground installation
- Coded remote control allow 30 to 50 meter transmission
Technical specification:
| Description |
Parameter |
|
Driving Method
|
Electro – mechanical screw driver piston type
|
|
Operating voltage
|
DC 18 V for normal Speed DC 12 V for ending speed |
|
Motor Output
|
15 watt per arm
|
|
Motor Amp.
|
2.1
|
|
Piston Displace
|
32 cm
|
|
Piston Speed
|
2.9 cm/sec
|
|
Back-up battery
|
12 volt. 7Ah rechargeable
|
|
Safety Clutch
|
Electric current sensing using H-Amp Auto Reverse
|
|
Electric Controller
|
Micro-processor based
|
|
Temperature
|
0 to 80˚C
|
|
Gear Box
|
Three stages planetary reducer
|
|
Manual Operation
|
Special released key during power failure
|
| Max. Weight of gate |
400 kg per wing with force adjustable |
SL100AC can be upgraded with metal pinion to support up to 1000kg gate weight.
SL100AC motor. Simpler system more powerful movement and lower cost system.
| 
